Specifications
Learn the pros of what makes PVC so special
Durable, Fire Resistant, Environmentally Friendly
WHY SHOULD YOU CHOOSE THE PVC PANELS FOR YOUR PROJECT?
•100% waterproof material – does not rot. •Ideal for both outdoor and indoor use.
•Can accept any type of paint.
•No maintenance is required after installation.
•Strong and lightweight.
•Easy to install.
•Fire resistant.
•Excellent aesthetic result.
•Recycled material.
PVC Technical Specifications
The default panels we use for the manufacturing of our systems, are the “Regular Panels”. If your project requires “Fire-Proof Panels”, then please make sure you request that at the beginning of your order procedure.
PROPERTY | TEST METHOD | UNITS | REGULAR PANELS | FIRE-PROOF PANELS |
---|---|---|---|---|
Density | DIN 53479 | g/cmᶟ | 0.55 | 0.55 |
Hardness | DIN 53505 | Shore ‘D’ | ≥ 42 | ≥ 42 |
Water Absorption | DIN 53495 | % | ≤ 1.0 | ≤ 1.0 |
Tensile strength* | DIN 53455 | MPa | ≥ 15 | ≥ 15 |
Elongation at break** | DIN 53455 | % | ≥ 15 | ≥ 15 |
Modulus of elasticity | DIN 53457 | MPa | 900 – 1500 | 900 – 1500 |
Impact strength Izod | ASTM D 256 | KJ/m² | ≥ 9.0 | ≥ 9.0 |
Impact strength Charpy | DIN 53253 | KJ/m² | ≥ 15 | ≥ 15 |
Flexural strength | DIN 53452 | MPa | > 32 | > 32 |
Compressive Strength at 10% Deformation | DIN 53421 | MPa | > 6.5 | > 6.5 |
Surface resistivity | ASTM D 257 | Ω | > 1 x 1014 | > 1 x 1014 |
Volume resistivity | ASTM D 257 | Ω-cm | > 1 x 1015 | > 1 x 1015 |
Dielectric Constant at 1 MHZ | ASTM D 150 | F/m | 1.56 | 1.56 |
Dielectric strength | DIN 53481 | KV/cm | ≥ 90 | ≥ 90 |
Vicat softening temperature | DIN 53460 | °C | ≥ 73 | ≥ 73 |
Heat Deflection temperature @ 1.8 MPa | DIN 53461 | °C | 58 | 58 |
Coefficient of Linear Expansion | DIN 53752 | mm/m °C | 0.08 | 0.08 |
Thermal conductivity | DIN 52616 | W/m K | 0.05 | 0.05 |
Smoke Production | EN 13501-1 | FIGRA 0,2 (W/s) FIGRA 0,4 (W/s) | Class B | Class B |
EN 13501-1 | SMOGRA (m²/s) | CLASS s2 | CLASS s1 | |
Flaming Droplets | EN 13823 | pc | CLASS d0 | CLASS d0 |
* 15 MPa for free foam sheet with typical density 0.7 g/cc
* 13 MPa for free foam sheet with typical density 0.55 g/cc
** 15% for free foam sheet with typical density 0.7 g/cc
** 13% for free foam sheet with typical density 0.55 g/cc